Initial commit: RNodeTHV4 boundary mode firmware for Heltec V4
Bridges LoRa mesh and TCP/WiFi backbone networks using microReticulum. Based on microReticulum_Firmware with boundary mode additions: - BoundaryMode.h: State management and EEPROM persistence - BoundaryConfig.h: WiFi captive portal for configuration - TcpInterface.h: TCP backbone interface with HDLC framing - Display.h: Custom OLED layout with network status indicators - Transport/Identity library patches for embedded memory constraints
This commit is contained in:
James L
64
variants/rak11200/pins_arduino.h
Executable file
64
variants/rak11200/pins_arduino.h
Executable file
@@ -0,0 +1,64 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#ifndef _VARIANT_RAK11200_
|
||||
#define _VARIANT_RAK11200_
|
||||
#endif
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
// #ifndef EXTERNAL_NUM_INTERRUPTS
|
||||
// #define EXTERNAL_NUM_INTERRUPTS 16
|
||||
// #endif
|
||||
// #ifndef NUM_DIGITAL_PINS
|
||||
// #define NUM_DIGITAL_PINS 40
|
||||
// #endif
|
||||
// #ifndef NUM_ANALOG_INPUTS
|
||||
// #define NUM_ANALOG_INPUTS 16
|
||||
// #endif
|
||||
// #ifndef analogInputToDigitalPin
|
||||
// #define analogInputToDigitalPin(p) (((p) < 20) ? (esp32_adc2gpio[(p)]) : -1)
|
||||
// #endif
|
||||
// #ifndef digitalPinToInterrupt
|
||||
// #define digitalPinToInterrupt(p) (((p) < 40) ? (p) : -1)
|
||||
// #endif
|
||||
// #ifndef digitalPinHasPWM
|
||||
// #define digitalPinHasPWM(p) (p < 34)
|
||||
// #endif
|
||||
|
||||
#define LED_GREEN 12
|
||||
#define LED_BLUE 2
|
||||
|
||||
#ifdef LED_BUILTIN
|
||||
#undef LED_BUILTIN
|
||||
#endif
|
||||
#define LED_BUILTIN LED_GREEN
|
||||
|
||||
static const uint8_t TX = 1;
|
||||
static const uint8_t RX = 3;
|
||||
|
||||
#define TX1 21
|
||||
#define RX1 19
|
||||
|
||||
#define WB_IO1 14
|
||||
#define WB_IO2 27
|
||||
#define WB_IO3 26
|
||||
#define WB_IO4 23
|
||||
#define WB_IO5 13
|
||||
#define WB_IO6 22
|
||||
#define WB_SW1 34
|
||||
#define WB_A0 36
|
||||
#define WB_A1 39
|
||||
#define WB_CS 32
|
||||
#define WB_LED1 12
|
||||
#define WB_LED2 2
|
||||
|
||||
static const uint8_t SDA = 4;
|
||||
static const uint8_t SCL = 5;
|
||||
|
||||
static const uint8_t SS = 32;
|
||||
static const uint8_t MOSI = 25;
|
||||
static const uint8_t MISO = 35;
|
||||
static const uint8_t SCK = 33;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
1
variants/rak11200/variant.h
Executable file
1
variants/rak11200/variant.h
Executable file
@@ -0,0 +1 @@
|
||||
// Just for consistency, for RAK11200 ESP32 Wrover all definitions are in the pins_arduino.h
|
||||
1
variants/rak11300/rak_variant.cpp
Executable file
1
variants/rak11300/rak_variant.cpp
Executable file
@@ -0,0 +1 @@
|
||||
#include "rak_variant.h"
|
||||
6
variants/rak11300/rak_variant.h
Executable file
6
variants/rak11300/rak_variant.h
Executable file
@@ -0,0 +1,6 @@
|
||||
#pragma once
|
||||
#include <stdint.h>
|
||||
#ifndef _VARIANT_RAK11300_
|
||||
#define _VARIANT_RAK11300_
|
||||
|
||||
#endif // #define _VARIANT_RAK11300_
|
||||
2
variants/rak11300/variant.h
Executable file
2
variants/rak11300/variant.h
Executable file
@@ -0,0 +1,2 @@
|
||||
// Just for consistency, for RAK11310 all definitions are in the pins_arduino.h
|
||||
#include "rak_variant.h"
|
||||
97
variants/rak3112/pins_arduino.h
Executable file
97
variants/rak3112/pins_arduino.h
Executable file
@@ -0,0 +1,97 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifndef _VARIANT_RAK3112_
|
||||
#define _VARIANT_RAK3112_
|
||||
#endif
|
||||
|
||||
#define USB_VID 0x303a
|
||||
#define USB_PID 0x1001
|
||||
|
||||
// GPIO's
|
||||
#define WB_IO1 21
|
||||
#define WB_IO2 2
|
||||
// #define WB_IO2 14
|
||||
#define WB_IO3 41
|
||||
#define WB_IO4 42
|
||||
#define WB_IO5 38
|
||||
#define WB_IO6 39
|
||||
// #define WB_SW1 35 NC
|
||||
#define WB_A0 1
|
||||
#define WB_A1 2
|
||||
#define WB_CS 12
|
||||
#define WB_LED1 46
|
||||
#define WB_LED2 45
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (46)
|
||||
#define PIN_LED2 (45)
|
||||
#define LED_BLUE PIN_LED2
|
||||
#define LED_GREEN PIN_LED1
|
||||
#define LED_BUILTIN LED_GREEN
|
||||
#define LED_CONN PIN_LED2
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (21)
|
||||
#define PIN_A1 (14)
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
// TXD1 RXD1 on Base Board
|
||||
#define PIN_SERIAL1_RX (44)
|
||||
#define PIN_SERIAL1_TX (43)
|
||||
|
||||
// TXD0 RXD0 on Base Board (NC due to large flash chip)
|
||||
// #define PIN_SERIAL2_RX (19)
|
||||
// #define PIN_SERIAL2_TX (20)
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (10)
|
||||
#define PIN_SPI_MOSI (11)
|
||||
#define PIN_SPI_SCK (13)
|
||||
#define SPI_CS (12)
|
||||
|
||||
static const uint8_t SS = SPI_CS;
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
// Internal SPI to LoRa transceiver
|
||||
#define LORA_SX126X_SCK 5
|
||||
#define LORA_SX126X_MISO 3
|
||||
#define LORA_SX126X_MOSI 6
|
||||
#define LORA_SX126X_CS 7
|
||||
#define LORA_SX126X_RESET 8
|
||||
#define LORA_SX126X_DIO1 47
|
||||
#define LORA_SX126X_BUSY 48
|
||||
#define LORA_SX126X_DIO2_AS_RF_SWITCH 1
|
||||
#define LORA_SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 2
|
||||
|
||||
#ifndef PIN_WIRE_SDA
|
||||
#define PIN_WIRE_SDA (9)
|
||||
#endif
|
||||
#ifndef PIN_WIRE_SCL
|
||||
#define PIN_WIRE_SCL (40)
|
||||
#endif
|
||||
#define SDA PIN_WIRE_SDA
|
||||
#define SCL PIN_WIRE_SCL
|
||||
|
||||
#define PIN_WIRE1_SDA (17)
|
||||
#define PIN_WIRE1_SCL (18)
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
5
variants/rak3112/variant.h
Executable file
5
variants/rak3112/variant.h
Executable file
@@ -0,0 +1,5 @@
|
||||
// Just for consistency, for RAK3112 ESP32-S3 all definitions are in the pins_arduino.h
|
||||
|
||||
#ifndef _VARIANT_RAK3112_
|
||||
#define _VARIANT_RAK3113_
|
||||
#endif
|
||||
36
variants/rak4630/WVariant.h
Executable file
36
variants/rak4630/WVariant.h
Executable file
@@ -0,0 +1,36 @@
|
||||
/*
|
||||
Copyright (c) 2015 Arduino LLC. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <nrf.h>
|
||||
#include <nrf_soc.h>
|
||||
#include <nrf_sdm.h>
|
||||
#include <nrf_gpio.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
extern const uint32_t g_ADigitalPinMap[] ;
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
54
variants/rak4630/variant.cpp
Executable file
54
variants/rak4630/variant.cpp
Executable file
@@ -0,0 +1,54 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "nrf.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] =
|
||||
{
|
||||
// P0
|
||||
0, 1, 2, 3, 4, 5, 6, 7,
|
||||
8, 9, 10, 11, 12, 13, 14, 15,
|
||||
16, 17, 18, 19, 20, 21, 22, 23,
|
||||
24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39,
|
||||
40, 41, 42, 43, 44, 45, 46, 47};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// LED1 & LED2
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
ledOff(PIN_LED1);
|
||||
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
ledOff(PIN_LED2);
|
||||
}
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
165
variants/rak4630/variant.h
Executable file
165
variants/rak4630/variant.h
Executable file
@@ -0,0 +1,165 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#ifndef _VARIANT_RAK4630_
|
||||
#define _VARIANT_RAK4630_
|
||||
|
||||
#define RAK4630
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
#include <Arduino.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
|
||||
/*
|
||||
* WisBlock Base GPIO definitions
|
||||
*/
|
||||
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
|
||||
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
|
||||
static const uint8_t WB_IO3 = 21; // SLOT_C
|
||||
static const uint8_t WB_IO4 = 4; // SLOT_C
|
||||
static const uint8_t WB_IO5 = 9; // SLOT_D
|
||||
static const uint8_t WB_IO6 = 10; // SLOT_D
|
||||
static const uint8_t WB_SW1 = 33; // IO_SLOT
|
||||
static const uint8_t WB_A0 = 5; // IO_SLOT
|
||||
static const uint8_t WB_A1 = 31; // IO_SLOT
|
||||
static const uint8_t WB_I2C1_SDA = 13; // SENSOR_SLOT IO_SLOT
|
||||
static const uint8_t WB_I2C1_SCL = 14; // SENSOR_SLOT IO_SLOT
|
||||
static const uint8_t WB_I2C2_SDA = 24; // IO_SLOT
|
||||
static const uint8_t WB_I2C2_SCL = 25; // IO_SLOT
|
||||
static const uint8_t WB_SPI_CS = 26; // IO_SLOT
|
||||
static const uint8_t WB_SPI_CLK = 3; // IO_SLOT
|
||||
static const uint8_t WB_SPI_MISO = 29; // IO_SLOT
|
||||
static const uint8_t WB_SPI_MOSI = 30; // IO_SLOT
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (6)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (35)
|
||||
#define PIN_LED2 (36)
|
||||
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
#define LED_CONN PIN_LED2
|
||||
|
||||
#define LED_GREEN PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (5) //(3)
|
||||
#define PIN_A1 (31) //(4)
|
||||
#define PIN_A2 (28)
|
||||
#define PIN_A3 (29)
|
||||
#define PIN_A4 (30)
|
||||
#define PIN_A5 (31)
|
||||
#define PIN_A6 (0xff)
|
||||
#define PIN_A7 (0xff)
|
||||
|
||||
static const uint8_t A0 = PIN_A0;
|
||||
static const uint8_t A1 = PIN_A1;
|
||||
static const uint8_t A2 = PIN_A2;
|
||||
static const uint8_t A3 = PIN_A3;
|
||||
static const uint8_t A4 = PIN_A4;
|
||||
static const uint8_t A5 = PIN_A5;
|
||||
static const uint8_t A6 = PIN_A6;
|
||||
static const uint8_t A7 = PIN_A7;
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
// Other pins
|
||||
#define PIN_AREF (2)
|
||||
#define PIN_NFC1 (9)
|
||||
#define PIN_NFC2 (10)
|
||||
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
// TXD1 RXD1 on Base Board
|
||||
#define PIN_SERIAL1_RX (15)
|
||||
#define PIN_SERIAL1_TX (16)
|
||||
|
||||
// TXD0 RXD0 on Base Board
|
||||
#define PIN_SERIAL2_RX (19)
|
||||
#define PIN_SERIAL2_TX (20)
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (29)
|
||||
#define PIN_SPI_MOSI (30)
|
||||
#define PIN_SPI_SCK (3)
|
||||
|
||||
static const uint8_t SS = 26;
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 2
|
||||
|
||||
#define PIN_WIRE_SDA (13)
|
||||
#define PIN_WIRE_SCL (14)
|
||||
#define PIN_WIRE1_SDA (24)
|
||||
#define PIN_WIRE1_SCL (25)
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK 3 // 19
|
||||
#define PIN_QSPI_CS 26 // 17
|
||||
#define PIN_QSPI_IO0 30 // 20
|
||||
#define PIN_QSPI_IO1 29 // 21
|
||||
#define PIN_QSPI_IO2 28 // 22
|
||||
#define PIN_QSPI_IO3 2 // 23
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES IS25LP080D
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user