RNode Flasher
*Only supports RAK4631 at this time.
1. Put device into DFU Mode
2. Select firmware to flash (.zip)
Flashing: {{flashingProgress}}%
Flashing: please wait...
3. Provision EEPROM (set device info, checksum and blank signature)
Product
Model
4. Set Firmware Hash (uses hash from board, will fix later)
5. Configure TNC Mode (optional)
Frequency (Hz)
Bandwidth
Tx Power (dB)
Spreading Factor
Coding Rate
Extra Tools
EEPROM dumps are shown in dev tools console.