deuxyeux/RNode_Firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

PMU edits

Browse Source
This commit is contained in:
Nickie Deuxyeux
2026-03-18 02:54:44 +03:00
parent 3f05d46411
commit d913d7b010
7 changed files with 61 additions and 26 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
Boards.h
View File

@@ -252,6 +252,7 @@
const int pin_led_tx = 4;
#elif BOARD_MODEL == BOARD_MESHADVENTURER_S3
#define IS_ESP32S3 true
#define HAS_DISPLAY true
#define HAS_NP true
#define HAS_BLUETOOTH false
@@ -266,8 +267,8 @@
#define DIO2_AS_RF_SWITCH false
#define HAS_RF_SWITCH_RX_TX true
#define HAS_LORA_LNA true
#define LORA_LNA_GAIN 17
#define LORA_LNA_GVT 12
#define LORA_LNA_GAIN 30
#define LORA_LNA_GVT 14
const int pin_cs = 39;
const int pin_sclk = 38;
@@ -281,10 +282,18 @@
const int pin_tcxo_enable = -1;
const int pin_btn_usr1 = 4;
const int pin_led_rx = 11;
const int pin_led_tx = 12;
const int pin_np = 48;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 48;
const int pin_led_tx = 48;
#else
const int pin_led_rx = 48;
const int pin_led_tx = 48;
#endif
#endif
#elif BOARD_MODEL == BOARD_MESHADVENTURER
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
@@ -298,8 +307,8 @@
#define DIO2_AS_RF_SWITCH false
#define HAS_RF_SWITCH_RX_TX true
#define HAS_LORA_LNA true
#define LORA_LNA_GAIN 17
#define LORA_LNA_GVT 12
#define LORA_LNA_GAIN 30
#define LORA_LNA_GVT 14
const int pin_cs = 18;
const int pin_sclk = 5;
@@ -1043,7 +1052,7 @@
#define HAS_BLUETOOTH false
#define HAS_BLE true
#define HAS_CONSOLE false
#define HAS_PMU false
#define HAS_PMU true
#define HAS_NP false
#define HAS_SD false
#define HAS_TCXO true
@@ -1070,8 +1079,6 @@
#define I2C_SDA 8 //P1.04
#define I2C_SCL 7 //P0.11
#define LED_ON LOW
#define LED_OFF HIGH
#define PIN_LED_RED 22 //P0.15
const int pin_led_rx = PIN_LED_RED;
const int pin_led_tx = PIN_LED_RED;
@@ -1087,9 +1094,9 @@
const int pin_miso = 15; //P0.02
const int pin_busy = 16; //P0.29
const int pin_dio = 11; //P0.10
const int pin_rxen = 2; //P0.17
const int pin_txen = -1;
const int pin_tcxo_enable = -1;
const int pin_rxen = 2; //P0.17
const int pin_txen = -1;
#else
#error An unsupported nRF board was selected. Cannot compile RNode firmware.

11
Config.h
View File

@@ -110,7 +110,16 @@
#define CSMA_CW_PER_BAND_WINDOWS 15
#define CSMA_BAND_1_MAX_AIRTIME 7
#define CSMA_BAND_N_MIN_AIRTIME 85
#define CSMA_INFR_THRESHOLD_DB 11
// Increase threshold for specific boards
#if BOARD_MODEL == BOARD_MESHADVENTURER_S3 || BOARD_MODEL == BOARD_MESHADVENTURER
#define CSMA_INFR_THRESHOLD_DB 14
#elif BOARD_MODEL == BOARD_PROMICRO
#define CSMA_INFR_THRESHOLD_DB 13
#else
#define CSMA_INFR_THRESHOLD_DB 11
#endif
#define CSMA_RFENV_RECAL_MS 2500
#define CSMA_RFENV_RECAL_LIMIT_DB -83
bool interference_detected = false;

4
Display.h
View File

@@ -53,7 +53,7 @@
#elif BOARD_MODEL == BOARD_HELTEC32_V2 || BOARD_MODEL == BOARD_LORA32_V1_0
#define DISP_RST 16
#define DISP_ADDR 0x3C
#define SCL_OLED 15
#define OBSCL_OLED 15
#define SDA_OLED 4
#elif BOARD_MODEL == BOARD_HELTEC32_V3
#define DISP_RST 21
@@ -73,7 +73,7 @@
#elif BOARD_MODEL == BOARD_MESHADVENTURER_S3
#define DISP_RST -1
#define DISP_ADDR 0x3C
#define SCL_OLED 0
#define SCL_OLED 44
#define SDA_OLED 42
#elif BOARD_MODEL == BOARD_MESHADVENTURER
#define DISP_RST -1

6
Makefile
View File

@@ -143,7 +143,7 @@ firmware-genericesp32: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
firmware-meshadventurer_s3: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:esp32s3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0xF2\""
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0xF2\""
firmware-meshadventurer: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0xF4\""
@@ -181,8 +181,8 @@ upload-genericesp32:
upload-meshadventurer_s3:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
# @sleep 1
# rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin

23
Power.h
View File

@@ -164,6 +164,22 @@ float pmu_temperature = PMU_TEMP_MIN-1;
bool bat_voltage_dropping = false;
float bat_delay_v = 0;
float bat_state_change_v = 0;
#elif BOARD_MODEL == BOARD_PROMICRO
#define BAT_V_MIN 3.15
#define BAT_V_MAX 4.165
#define BAT_V_CHG 4.48
#define BAT_V_FLOAT 4.33
#define BAT_SAMPLES 7
const uint8_t pin_vbat = 17;
float bat_p_samples[BAT_SAMPLES];
float bat_v_samples[BAT_SAMPLES];
uint8_t bat_samples_count = 0;
int bat_discharging_samples = 0;
int bat_charging_samples = 0;
int bat_charged_samples = 0;
bool bat_voltage_dropping = false;
float bat_delay_v = 0;
float bat_state_change_v = 0;
#elif BOARD_MODEL == BOARD_TECHO
#define BAT_V_MIN 3.15
#define BAT_V_MAX 4.16
@@ -202,7 +218,7 @@ void measure_temperature() {
}
void measure_battery() {
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC_T114 || BOARD_MODEL == BOARD_TECHO
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC_T114 || BOARD_MODEL == BOARD_PROMICRO || BOARD_MODEL == BOARD_TECHO
battery_installed = true;
#if BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4
battery_indeterminate = false;
@@ -218,6 +234,8 @@ void measure_battery() {
float battery_measurement = (float)(analogRead(pin_vbat)) / 4095.0*6.7828;
#elif BOARD_MODEL == BOARD_HELTEC_T114
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.017165;
#elif BOARD_MODEL == BOARD_PROMICRO
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.017165;
#elif BOARD_MODEL == BOARD_TECHO
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.007067;
#else
@@ -225,6 +243,7 @@ void measure_battery() {
#endif
bat_v_samples[bat_samples_count%BAT_SAMPLES] = battery_measurement;
bat_p_samples[bat_samples_count%BAT_SAMPLES] = ((battery_voltage-BAT_V_MIN) / (BAT_V_MAX-BAT_V_MIN))*100.0;
bat_samples_count++;
@@ -411,7 +430,7 @@ bool init_pmu() {
pmu_temp_sensor_ready = true;
#endif
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_TECHO
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_TECHO || BOARD_MODEL == BOARD_PROMICRO
pinMode(pin_vbat, INPUT);
return true;
#elif BOARD_MODEL == BOARD_HELTEC32_V3

2
RNode_Firmware.ino
View File

@@ -135,7 +135,7 @@ void setup() {
boot_seq();
#endif
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_HELTEC_T114 && BOARD_MODEL != BOARD_PROMICRO && BOARD_MODEL != BOARD_TECHO && BOARD_MODEL != BOARD_T3S3 && BOARD_MODEL != BOARD_TBEAM_S_V1 && BOARD_MODEL != BOARD_HELTEC32_V4
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_HELTEC_T114 && BOARD_MODEL != BOARD_MESHADVENTURER_S3 && BOARD_MODEL != BOARD_PROMICRO && BOARD_MODEL != BOARD_TECHO && BOARD_MODEL != BOARD_T3S3 && BOARD_MODEL != BOARD_TBEAM_S_V1 && BOARD_MODEL != BOARD_HELTEC32_V4
// Some boards need to wait until the hardware UART is set up before booting
// the full firmware. In the case of the RAK4631 and Heltec T114, the line below will wait
// until a serial connection is actually established with a master. Thus, it

8
Utilities.h
View File

@@ -385,10 +385,10 @@ uint8_t boot_vector = 0x00;
void led_id_on() { }
void led_id_off() { }
#elif BOARD_MODEL == BOARD_PROMICRO
void led_rx_on() { digitalWrite(pin_led_rx, LED_ON); }
void led_rx_off() { digitalWrite(pin_led_rx, LED_OFF); }
void led_tx_on() { digitalWrite(pin_led_tx, LED_ON); }
void led_tx_off() { digitalWrite(pin_led_tx, LED_OFF); }
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
void led_id_on() { }
void led_id_off() { }
#elif BOARD_MODEL == BOARD_HELTEC_T114